Free, no upload, no watermark
Add Audio to Video, Music Lowered While You Speak
Add audio to video in a few clicks: drop in a video and a song, a voiceover or a sound effect, and choose to put it under the video’s own sound or in its place. Under a voice the music drops while someone speaks and comes back up in the pauses. Pick where it starts and which part plays, loop it, fade it, and hear the mix before you save. The picture is copied as it is, the video keeps its format and length, and it all runs in your browser, free.
Music under an interview, lowered while they speak
An interview with a beekeeper gets lo-fi music under both voices. While either of them speaks the music sits 18 LU under the voice, and it comes back up in the pauses.
MP4 → MP4 · 2 MB → 2.9 MB · 1.6 s · picture identical (MD5) · starts 0.00 ms from the set point · music 18.0 LU under the voice · AAC
- no sign-up, no watermark
- Free
- music under the voice while it speaks
- 24, 18, 13 LU
- at most from where you set it (MP4, MOV)
- 0.04 ms
- sound ends on the last frame
- Same length
- picture packets match the source (MD5)
- Byte for byte
- MP4 and MOV with Opus sound
- Firefox too
How do I add audio to a video?
To add audio to video, open the studio, drop in the video and then the song or sound. Keep “Add under the original” to lay it under the video’s own sound, with the music lowered while someone speaks, or choose “Replace with new sound”. Drag it to where it should start, trim or loop it, press play to hear the mix, then make the video. It is free and runs in your browser.
Add music to video in three steps
To add audio to video, the video can be MP4, MOV, WebM or MKV; the sound MP3, M4A, WAV, FLAC, OGG, Opus, or the sound of another video.
Drop in the video and the sound
The studio reads the video’s picture and sound, listens for a voice in it, and shows both waveforms.
Place it and listen
Drag the sound to where it should start, pull the handles to use part of it, loop or fade it, set the two volumes, and play the video to hear the mix as it will be saved.
Make the video
The same video comes back in the same format with its new sound, as long as the picture, ready to download.
Add sound to video the way an editor would
Placing, trimming, looping, fading and ducking, worked out once and used for both the preview and the file, so what you hear is what you get.

The music lowers itself while someone speaks
The studio finds where the video’s own sound has a voice: speech that stands over the sound’s floor and rises and falls with syllables, which music and wind don’t. There the music sits 24, 18 or 13 LU under the voice, as you choose; it comes down 0.3 s before the words and back up over 0.9 s after them, and short breaths don’t make it pump. Measured on our samples, the music sat within 1 LU of the level set.
Add sound to video at the exact moment
Drag the sound along the video, or set the second it starts. An MP3’s encoder delay is taken off first, so the first sound you hear lands exactly there: our check by cross-correlation measured 0.00 to 0.04 ms between the set point and the file in MP4 and MOV. The handles pick the part of the sound to use, down to a tenth of a second.
Loops and fades without a click
A short track can loop to the end of the video, each repeat laid over the last for 1.5 seconds with equal power, so the join has no bump and no click. It fades in and out as you choose, and when it runs past the video it fades out on the last frame.
Always as long as the video
The new sound track starts on the first frame and ends on the last, whatever the sound’s own length: a long song is cut and faded at the end, a short one stops or loops. On every sample the sound track was within one audio frame of the picture.
Every browser, the format kept
MP4, MOV, WebM and MKV come back as themselves. Chrome and Edge write AAC into MP4 and MOV; Firefox, which has no AAC encoder, writes Opus into the same MP4 or MOV, which plays in Chrome and Firefox, so Firefox users get a video too. WebM and MKV get Opus everywhere.
The picture copied, never encoded
Only the sound is new. Every picture packet is copied as it was, with its rotation, so the quality, size and frame rate don’t change, and the filming date and location stay. A 38-minute 1080p video with a looped track under it took 29 seconds in Chrome and 46 in Firefox on our desktop.
Add music to video samples
This site’s own videos and sounds, put together by the studio in Chrome and measured: where the sound starts, how far under the voice the music sat, the length and the picture’s MD5. Switch between the original and the new version at any moment, or open one in the studio with the same settings.
Add audio to video: the full guide
Add music to video, or replace audio in video
Most videos with someone talking want music under the voice: keep “Add under the original” and leave “Lower the music while someone speaks” on. A product shot, a landscape or a game clip whose own sound you don’t need wants “Replace with new sound”. A video with no sound at all takes the new sound as its only track either way.
A single moment, a door or a whoosh, is the same as music: drop the sound effect in and drag it to its moment, with ducking off so it plays at its own level.
How the music is lowered under a voice
The studio reads the video’s own sound every 10 ms. Where it stands at least 10 dB over the sound’s quietest tenth, and the voice band between 300 and 3,400 Hz rises and falls by 20 dB or more within a second, someone is speaking. Gaps under 0.7 s count as breaths. On this site’s talks it found 98.8% of the speech their transcripts mark. It heard no voice in ambience or a game; in three instrumentals with no voice it marked 0, 2.5 and 14 seconds, where the music dips.
Where someone speaks, the music’s loudness is set the chosen distance under the voice’s: 24 LU for quiet music, 18 for medium, 13 for present. Elsewhere it plays at the volume you set. Turn ducking off for music videos and soundtracks that should stay level.
If the voice in your video is quiet, raise “Original sound volume”: the music follows the voice down, so it stays the same distance under it.
When the sound is longer or shorter than the video
Longer: it is cut at the video’s last frame and faded out over the last seconds, so the video never ends on a chopped note. Shorter: it stops where it ends, or loops to the end with “Loop to the end of the video”.
Add MP3 to MP4, and other formats
To add MP3 to MP4, drop the MP4 in, then the MP3: the result is an MP4 with AAC sound. M4A, WAV, FLAC, OGG and Opus work the same way, and so does the sound of another video. The video keeps its format: MOV stays MOV, WebM stays WebM, MKV stays MKV.
When the new sound is already AAC (an M4A) and replaces the old one whole from the first frame, with no fade or volume change and no longer than the video, it goes in packet for packet, not encoded again.
Merge audio and video, or replace audio in video
To merge audio and video recorded separately, drop the video in, then the recording, choose “Replace with new sound” and turn the fades off; set the start if the two need lining up. To replace audio in video with a new track, the same mode does it, with fades and a loop if you want them.
Adding music on a phone
Phone video editors can add a song to a clip from their music library. Use this studio when you want the music lowered under a voice automatically, the original format and filming date kept, a long video, or when you work in Firefox or on a computer.
No music yet?
This site can make you one: an instrumental with the AI music generator, a sound effect or a voiceover with text to speech. Those use credits; adding the result to your video here is free. To start from a silent video, remove the audio from the video first, in this same studio. For a sound with only a picture, see MP3 to MP4.
What people add sound to video for

Vlogs and talks
A soft bed of music under the voice, lowered while you speak and back up between thoughts.

Product and travel clips
A silent shot or one full of wind, given a track from the first frame to a fade on the last.

Voiceovers
A narration recorded on its own, laid on the footage and placed to the moment it should begin.

Sound effects at a moment
A whoosh, a door or a cheer dropped exactly where it happens on screen.

Short vertical videos
Fifteen seconds cut from the best part of a track, under a cooking tip or a quick how-to.

Lessons and long recordings
A short calm track looped under an hour-long talk without a click at any join.
Add audio to video FAQ
Add audio to video now
Drop in a video and a sound, place it, hear it, and save the same video with its new sound.



