Free, nothing to install
Bass Booster Online
This bass booster adds bass to an MP3, WAV or video: up to +18 dB anywhere from 30 to 250 Hz, as a shelf or a peak. Its Phone speaker preset swaps the deep bass a phone can’t play for the bass’s harmonics, which small speakers can play. A limiter keeps every peak under −1 dBTP, and the file comes back in its own format. It all runs in your browser.
A loud synthwave song, more bass for headphones
Already mastered loud. The auto level takes it down a little, so the extra bass fits and the kicks aren’t squashed.
Headphones · +6 dB below 100 Hz · level −0.5 dB
Bass against the rest+2.8 dB
Bass on a phone−1.2 dB
Loudness−11.0 → −11.3 LUFS
True peak after−1.3 dBTP
- no sign-up, nothing uploaded
- Free
- or −12 dB, 30 to 250 Hz
- +18 dB
- bass on a phone, Phone speaker preset (median)
- +3.4 dB
- no clipping, measured on the file
- −1 dBTP
- MP3, WAV, AAC and video
- Format kept
- before and after compared fairly
- Same loudness
How do I bass boost a song?
Open the bass booster and drop the song in. Pick a preset such as Headphones or Phone speaker, or set how much bass and where, and press Play to compare it with the original at the same loudness. Then press Boost the bass: the bass booster keeps the peaks under −1 dBTP and you download the song in its own format, MP3 as MP3, a video as a video.
Use the bass booster in three steps
The bass booster works on a phone or a computer, in any current browser, with any audio or video file it can read.
Add the song
Drop an MP3, WAV, M4A, FLAC or video in. Its loudness, peaks and bass are read first.
Set the bass
Pick a preset or set the amount, the frequency and the shape. The curve, the spectrum and the readouts follow as you go.
Save it with more bass
Boost the bass and download it in the same format, with what the bass booster measured after.
A bass booster that sounds clean, even on a phone
An online bass booster with presets for each kind of speaker, harmonics for small ones and a limiter that keeps peaks in check, every result measured.

Presets for headphones, cars and phones
Headphones, Phone speaker, Bass boosted, Car and subwoofer, Fuller voice and Less bass, each a starting point. Or set the bass yourself: −12 to +18 dB, 30 to 250 Hz, a shelf that lifts everything below, or a peak around one frequency, with an optional low cut for rumble.
Bass a phone speaker can actually play
A phone plays little below 200 Hz, so a plain bass boost adds sound it can’t reproduce. The Phone speaker preset cuts that deep bass and adds its 2nd to 5th harmonics, the higher of which a phone can play, and the ear hears the low note from them; the Phone speaker harmonics slider adds them to any setting. On five of the site’s songs, the Phone speaker preset raised the bass a phone plays by 0.9 to 4.2 dB, where the Headphones preset lowered it by 0.6 to 2.2 dB.
Bass boosted without clipping
More bass means higher peaks. A true-peak limiter keeps every peak under −1 dBTP, checked on the file after it is written, and the auto level takes a loud song down just enough for the extra bass, so the limiter only shaves the loudest peaks, by about 3 dB in our tests, instead of squashing the song.
Compare at the same loudness
A louder version tends to sound better, so while you compare the bass booster turns the louder side down to the other’s loudness, and you hear the bass change, not a volume change. Hear it on a phone plays either version as a small speaker would.
The bass, measured
Before you save, the readouts give how much the bass stands out against the rest of the mix, the bass a phone plays, the loudness and the true peak; after, the loudness, true peak and limiter are measured again on the file. In our tests (five songs, six presets) the prediction landed within 0.1 LU of the file the bass booster wrote.
The same kind of file out
An MP3 stays an MP3 at its own bitrate and sample rate, with its tags and cover art; a 24-bit WAV stays 24-bit; an M4A stays AAC in browsers that can write it. A FLAC or other lossless file comes back as WAV. Or save as MP3 or WAV.
Bass boost a video, still a video
Drop in an MP4, MOV or WebM and the picture is copied as it is; only the sound gets more bass. Where a browser can’t write that sound, or the video is over 1 GB (300 MB on a phone), the bass booster saves the sound as MP3 and says so.
Less bass too
A voice recorded close to the microphone, or a mix that booms, takes a cut instead: down to −12 dB, with the same readouts. The boomy phone greeting in the samples gets the +8 dB shelf it was given taken back out exactly.
Bass booster samples: before and after, measured
Each pair was made by this bass booster’s own code from the site’s music and voices, saved as 192 kbps MP3 and measured on both files. Each opens its settings in the studio.
Bass booster guide: where bass lives and how much to add
Where the bass is
Sub-bass sits from about 30 to 60 Hz: a kick drum’s thump and an 808’s long tone, felt more than heard. Bass from 60 to 120 Hz carries a bass line’s notes. From 120 to 250 Hz is body: warmth in a voice, weight in a guitar, and mud when there is too much.
A shelf lifts everything below its frequency, the usual bass boost. A peak lifts a band around one frequency and leaves the very low end alone, which helps on car speakers and for a voice.
Why phone speakers lose the bass
A phone or laptop speaker is too small to move the air low notes need, so it plays little below about 200 Hz. A plain bass boost raises what it can’t play, and the limiter then has to turn the whole song down to make room, so the song can even sound thinner on a phone.
The Phone speaker preset works the other way: it cuts the sub-bass and adds the harmonics of the bass, at two to five times its frequency. A phone plays the higher ones, and the ear fills in the low note they belong to, the effect called the missing fundamental. Hear it on a phone in the studio lets you check it with headphones on.
How much bass boost to use: the presets
The presets are good starting points, each tried on the site’s songs (the samples below). Past the Bass boosted preset’s +12 dB the rest of the song has to give way, as the readouts show.
- 1Headphones: +6 dB below 100 Hz.
- 2Phone and laptop speakers: the low cut at 100 Hz and full harmonics.
- 3Bass boosted: +12 dB below 110 Hz with some harmonics.
- 4Car and subwoofer: +8 dB around 70 Hz.
- 5A voice: +4 dB around 150 Hz with the rumble under 60 Hz cut.
If you set the overall level yourself and the limiter takes more than about 3 dB, try less bass, or a peak instead of a shelf.
Clipping, true peak and the auto level
A digital file can’t go past full scale, and between two samples the sound can rise higher than either; an MP3 encoder can push it higher still. The bass booster measures that true peak four times oversampled and keeps it under −1 dBTP, and checks the MP3 it writes after encoding.
Of six online bass boosters we tried at their default settings, four wrote files over 0 dBTP. Here the auto level lowers a loud song by what the extra bass adds to its peaks, less what the limiter may take, so the bass stands out by what you set without the song being squashed.
A bass booster for files
Bass booster extensions and equalizer apps change the sound while it plays, on that one device. This bass booster changes the file: the bass plays the same everywhere you play it, share it or upload it.
What people use a bass booster for
Wherever the low end is too thin, or too heavy, a bass booster puts it where you want it.

Songs for headphones
A few dB below 100 Hz, so a thin mix feels full without the vocals going muddy.

Music for phone speakers
The Phone speaker preset adds the bass’s harmonics, which a phone or laptop speaker can play.

Bass boosted edits
A heavy low end for a rap beat or a remix, still under −1 dBTP.

Car stereos and subwoofers
More weight around 70 Hz, where car speakers have room to move.

Podcasts and voiceovers
A fuller voice around 150 Hz, with the rumble below cut out.

Videos with a thin sound
More bass in a clip’s soundtrack, the picture left untouched.
Bass booster FAQ
Open the bass booster
Drop a song into the bass booster, pick a preset, compare it at the same loudness and save it with more bass, measured.



