Whoosh, riser, impact

Transition Sound Effects: Whooshes, Risers and Impacts on Cue

Describe the move you see and your transition sound effects arrive seconds later: a whoosh that crosses the cut, a riser that pulls into the next scene, a boom that lands on the title. Each one comes as 4 takes side by side, trimmed and at one loudness, ready for your timeline.

Whoosh and boom

“A fast cinematic whoosh that sweeps left to right and ends in a deep boom”

4 takes · 1.6–2.7 s

Generated in our studio from this description and made ready to use, with no other edits.

of every transition, side by side
4 takes
from a quick swoosh to a riser
1 to 22 s
describe speed, weight and texture
Your words
silence trimmed, one loudness
Ready to use
48 or 44.1 kHz, or 320 kbps
WAV or MP3
4 takes of 3 seconds
4 credits

What are transition sound effects?

Transition sound effects are short sounds that carry a viewer from one shot to the next: a whoosh or swoosh for a fast move, a riser that builds before a cut, an impact that lands on it, a glitch or reverse swell for a stylised edit. Describe the one you need, pick a length, and the studio makes 4 takes to choose from.

How to make transition sound effects

Three steps from the cut on your timeline to a whoosh that fits it.

  1. Describe the move

    Say how fast it is, how big, and what it is made of: "a fast airy whoosh that sweeps left to right and ends in a deep boom". The examples on this page show how a good description reads.

  2. Match the length to the shot

    A swoosh for a pan takes 1 or 2 seconds, a riser 5 to 10. Choose the length, up to 22 seconds, and how many takes you want, up to 4.

  3. Pick, trim and download

    Play the takes side by side, trim the one you like so it peaks on the cut, add a fade, and download it as WAV or MP3.

Transition sound effects made for the edit

A transition only works when it lands on the frame and sits at the right level under the picture. Everything here is built around that moment.

A murmuration of starlings sweeping across a winter sky at dusk

Four takes of every whoosh sound effect

The same description can sweep faster, darker or brighter each time. You hear 4 takes side by side and keep the one that matches the speed of your cut, or keep several for a sequence with many cuts.

Descriptions that steer the sound

Speed, size, material and direction change a transition more than anything: "airy" and "metallic", "short" and "long", "rising" and "falling". Write it the way you would explain it to an editor, in a sentence.

Levels that sit under the picture

Raw generated sounds arrive at very different levels, some with a second of silence at the end. Each transition here has its silence trimmed, a short fade at the end and the same loudness as the others, with no peak over the limit.

Trim it to land on the frame

Drag the edges of a take so the whoosh peaks exactly where the cut falls, add a fade in or out, and play the cut before you download. The file is the sound you heard.

Every sample here downloads

Each card on this page plays a transition the studio made and saves that same file with one click. Use it to try the timing on your own edit, then make your own version from the same description.

Specs and credits you can see

Takes come as stereo WAV at 48 or 44.1 kHz or MP3 at 320 kbps. One credit pays for every 3 seconds made, so 4 takes of 3 seconds use 4 credits, shown on the button before you start.

Transition sound effects made from one sentence

Each sample was generated in the studio from the description on its card and made ready to use, with no other edits. Play it, download it, or open the description in the studio to make your own.

The kinds of transition sound effects

Editors reach for a handful of shapes again and again. Knowing their names makes them easier to ask for, and easier to place.

  1. 1Whoosh: air moving fast past the listener, for a whip pan, a slide or a title flying in.
  2. 2Swoosh: a lighter, shorter whoosh, for small moves and graphics.
  3. 3Riser: a sound that climbs in pitch or intensity for several seconds and stops on the cut.
  4. 4Impact or boom: a hit with a low tail that lands on the new shot or the title.
  5. 5Braam: a huge low brass blast, the trailer sound for a reveal.
  6. 6Glitch: short digital stutters and crackles for a fast, broken edit.
  7. 7Reverse swell: a cymbal or chord played backwards, rising into the cut.

How to describe a whoosh sound effect

A whoosh sound effect is air, so describe its speed and what pushes it: "a fast airy whoosh", "a slow heavy whoosh like a large cloth", "a sharp metallic whoosh". Add the direction when the picture moves: "sweeping left to right" or "flying past close".

Then say how it ends. "Ends in a deep boom" gives you a whoosh and an impact in one take; "fades out softly" keeps it light under dialogue.

Change one word at a time between runs: "fast" to "very fast", "airy" to "metallic". Small changes are easy to hear side by side.

Placing transitions on the timeline

Most transition sound effects should start a few frames before the cut and peak on it, so the ear hears the move as the picture changes. A riser ends on the cut; an impact starts on the frame of the new shot.

Layering works: a whoosh into an impact, or a riser into a boom, often sounds bigger than one long take. Generate the parts separately, at the same loudness, and stack them.

  1. 1Put the peak of the whoosh on the cut.
  2. 2Start a riser so it ends on the cut.
  3. 3Lay an impact on the first frame of the new shot.
  4. 4Pull the level down under dialogue.

Cinematic and trailer transitions

Trailers lean on big, low sounds: braams, booms with long tails, deep hits and sub drops. Ask for the size and the space: "a huge low brass braam in a vast hall", "a deep cinematic boom with a long rumbling tail". Give these 3 to 5 seconds so the tail has room to ring out.

Keeping a set of transitions consistent

A video with twenty cuts wants transitions that sound like one family. Write one description, generate 4 takes and use them in turn, or keep the same wording and change only the length. Because every take comes out at the same loudness, they already sit together.

For the video itself, the audio visualizer turns a soundtrack into a moving picture and the subtitle generator burns captions in. For any other sound, the AI sound effect generator takes a description of anything.

Where transition sound effects make an edit move

A good transition sound effect is felt more than heard: the cut lands, and the viewer keeps watching.

A wave crashing against a stone sea wall at dusk

Cinematic scene changes

A whoosh sound effect into a deep boom carries the viewer from one world into the next.

A cliff above a sea of clouds just before sunrise

Tension before the reveal

A riser climbs under the last shot and stops dead on the cut.

A boulder landing on a desert plain in a ring of dust

Title and logo hits

A heavy impact with a rumbling tail lands on the frame where the title appears.

A colossal stone gate in fog with light in its gap

Trailers and teasers

A low brass braam gives a reveal the size of a film trailer.

Shards of broken glass splitting magenta and cyan light

Fast, broken edits

Short digital glitches stutter across jump cuts and fast montages.

A ribbon of incense smoke rising in a beam of light

Smooth fades and dissolves

A reverse swell rises gently into the next shot instead of a hard cut.

Transition sound effects FAQ

Make transition sound effects for your next cut

Describe the whoosh, riser or impact, hear 4 takes in seconds, and download the one that lands.

Make transition sounds