Free, no sign-up, no watermark
Video Speed Changer, Voice Kept at Its Pitch
This video speed changer makes any video faster or slower, from 0.25× to 16×: a short clip at 2× takes about a second, and 10 minutes of 1080p at 2× took 15 s in Chrome. Up to 60 frames a second, and whenever you slow down, the picture is copied packet for packet, so it looks exactly as it did; faster than that it is encoded at 60 frames a second. The voice keeps its pitch, or follows the speed if you like. It runs in your browser, free, with no sign-up and no watermark.
A product video at 2× and 0.5×, the voice at its pitch
A presenter talks over a slow push in on three mugs. Twice as fast or half as fast, her voice keeps its pitch and the picture is copied packet for packet.
Chrome · 2× · 0:22 → 0:11 · picture packets identical · level 3.1 → 3.2 · pitch kept · 2.1 MB → 2 MB · made in 0.53 s
Chrome · 0.5× · 0:22 → 0:43 · picture packets identical · pitch kept · 2.1 MB → 2.8 MB · made in 1.8 s
- no sign-up, no watermark
- Free
- nine speeds, or type your own
- 0.25× to 16×
- picture packets copied up to 60 fps
- Byte for byte
- a 22-second clip at 2× in Chrome (our browser check)
- 0.5 s
- speech and music, measured ×1.00
- Pitch kept
- for 10 minutes of 1080p at 2×
- 15 s
How do I speed up a video?
To speed up a video, open this video speed changer, drop the video in, pick a speed (2× halves its length) and press Make it. To slow down a video, pick 0.5× or 0.25× the same way. The voice keeps its pitch, and up to 60 frames a second the picture is copied as it is, so it takes seconds. It is free, needs no sign-up and adds no watermark.
Change video speed in three steps
Any file the browser reads works: MP4, MOV and M4V, WebM and MKV, from a phone, a camera or a screen recorder.
Drop in the video
The studio reads its format, picture, frame rate and sound, and plays it at the speed you pick so you can preview it.
Pick a speed and the sound
From 0.25× to 16×, or type your own. Keep the pitch, let it follow the speed, or remove the sound.
Download the new video
Compare it with the original, then download it; a copied picture keeps the file’s own format.
Speed up video without touching the picture
Changing a video’s speed can mean new timing, not new pictures. Here is what this tool keeps and when it encodes.

The picture copied, only its timing new
At 2× each frame simply lasts half as long; at 0.5×, twice as long. So when you speed up video to 60 frames a second or less, and every time you slow down video, the studio copies each picture packet as it is and writes new times. We check the samples here by MD5: the picture data matches the original exactly. A 22-second clip at 2× took 0.5 s in Chrome.
Faster than 60 fps, encoded at 60
A 30 fps video at 4× would play 120 frames a second, more than most screens and phones play smoothly. Above 60 fps the studio decodes the video and encodes it at 60 fps, each new frame the source frame due at that moment, at high quality (our reverse video test clip: VMAF 96.0 in Chrome, 95.8 in Firefox).
The voice at its own pitch
Sped up, a voice usually turns squeaky; slowed down, it drones. Here the pitch stays where it was: speech is stretched by its own rhythm so words stay clear, and music keeps its key. On our test clips the pitch measured ×1.00 kept, or ×2.00 at 2× when you let it follow the speed like a record.
Smooth slow motion starts with the filming
Slowing down shows each frame for longer, so 30 fps at 0.5× becomes 15 different pictures a second. To make a slow motion video look smooth, film at a high frame rate: a 120 fps clip at 0.25× still plays 30 pictures a second, copied as they are.
Long videos, written as they are made
Copies are written to your browser’s storage as they are made, so a long video needs no more memory than a short one. 10 minutes of 1080p at 2× took 15 s in Chrome and 12 s in Firefox, most of it spent on the sound; the same 10 minutes at 16×, encoded at 60 fps, took 40 s in Chrome; at 0.5× it took 40 s.
Formats, levels and phone details kept
A copied video keeps its container: MP4 stays MP4, MOV stays MOV, WebM stays WebM. The stream’s level, which tells players how much decoding power the stream needs, is raised to match (3.1 to 3.2 for 720p at 60 fps). Rotation comes along, and a phone clip’s filming date and place.
Video speed changer samples
Each video is one of this site’s own, made faster or slower by this video speed changer in Chrome and measured: picture packets, pitch, sizes and the time it took. Switch speeds at any moment, or open one in the studio.
Change video speed: the full guide
What changing the speed does to a video
Each frame in a video has a time and a length. To speed up video, the studio divides both by the speed; to slow down video, the same division with a speed below 1. The pictures themselves don’t change, which is why the studio can copy them.
Only when the new frame rate would pass 60 frames a second are new frames needed. Then the video is decoded and encoded at 60 fps, which also keeps the file from growing four or sixteen times in bitrate.
Speed up video for time-lapses and tutorials
Use 1.25× to 2× to tighten a talk or a tutorial; the voice keeps its pitch and stays clear. Use 4× to 16× for cooking, building or travel clips that should feel like a time-lapse; from 4× the sound starts off, since a voice at that speed is hard to follow, and you can keep it following the speed instead.
Slow down video for detail
Use 0.75× to follow a dance or a sports move, 0.5× or 0.25× for a splash or a jump. Every slow-down copies the picture, so nothing is lost. For a smooth slow motion video, the clip has to be filmed at a high frame rate first.
How to speed up or slow down a video on iPhone or Android
A phone’s photo app lets you change the speed of slow-motion clips it filmed itself; ordinary videos need a video editing app.
Use this tool when you work on a computer, when the file should keep its format and filming date, or when the video is long. A phone browser should handle the speeds whose picture is copied. One that can encode video, such as Chrome on Android, should make the faster speeds as well.
The command-line way to change video speed
With the command line, ffmpeg -i in.mp4 -filter:v "setpts=PTS/2" -filter:a "atempo=2" out.mp4 makes a video twice as fast, encoding the picture again. The studio copies the picture instead whenever it can.
Only the sound, or the video backwards
To change the speed of a song or a recording, with slowed and reverb presets, use the audio speed changer. To play a video backwards, use reverse video. To lay music under the result, add audio to the video.
When people change video speed

Tutorials and talks
A lesson or a talk at 1.25× or 1.5×, shorter to watch, the voice still natural.

Time-lapses
Cooking, a grill’s smoke or a day by the window at 4× to 16×, a minute of it in a few seconds of video.

Slow motion moments
A wave, a splash or a jump at 0.5× or 0.25×, every frame shown longer.

Product clips
A product video sped up to come closer to the length a post allows, the presenter’s voice at its own pitch.

Long recordings
A long how-to or a talk sped up to review it, written to the browser’s storage as it is made.
Video speed changer FAQ
Change video speed now
Drop a video into the video speed changer, pick a speed and get it back faster or slower, the voice at its pitch.



