Free, in your browser, no app
Sound Test
This sound test checks speakers and headphones right in your browser: free, with no app to install and no sign-up. Press Start the sound test and it plays left, right and both in turn, naming each side, at a level you can read (−20 dBFS to begin). Then take a six-round blind check that ends in a verdict, hear phase on pink noise, and find where your bass and treble give out with sweeps and steps. Nothing is recorded or uploaded.
Left, right and both, named as they play
A 500 Hz tone on each side in turn, each side named first.
500 Hz
Sine · −20 dBFS · Left, then Right, then Both
- no app, no sign-up
- Free
- every test at a stated level
- −20 dBFS
- a blind check with a verdict
- 6 rounds
- pink noise for the phase check
- 100 Hz to 1 kHz
- sweeps you can stop and read
- 20 Hz to 20 kHz
- ISO 266, from 200 Hz down to 20 Hz
- 11 bass steps
How do I test my speakers or headphones online?
Open the sound test, turn your volume down and press Start the sound test. A 500 Hz tone plays on the left, then the right, then both, and a voice names each side first, so a swapped cable or a dead channel shows at once. For a firmer answer, run the blind check: six short tones in a hidden order, and a verdict at the end. Then use the phase noise, the sweeps and the bass steps to hear the rest of the range.
Run a sound test in three steps
This speaker test works the same on desk speakers, a laptop, headphones or a phone, in any current browser.
Turn it down and start
Every test plays at −20 dBFS until you move the level slider. Lower your device’s volume first, then press Start the sound test; Space starts and stops it.
Play each side
Left, Both and Right each play a 500 Hz tone, and the meters show the silent side with no level at all. Take turns plays all three, saying each side first.
Read the verdict
The blind check plays six tones you can’t see coming and asks where each one came from. Its verdict says what to fix: swapped sides, a silent channel, mono, or one side playing louder.
A speaker test and headphone test with numbers behind it
Each check in this sound test plays a known signal at a known level, and the output panel shows both channels as they play.

Left, right and both at the same level
Panning a tone to the middle makes each side 3 dB quieter. This left right audio test switches channels instead: Left and Right play one speaker at −20 dBFS and keep the other silent, and Both plays each speaker at that same −20 dBFS. A side that sounds weaker in Both really is weaker.
A blind check that ends in a verdict
Six rounds of a 500 Hz tone, two on the left, two on the right and two on both, in an order the screen keeps hidden. Answer Left, Both, Right or Nothing, hear a round again if needed, and the check reads all six answers together. Here every answer matched: left and right are in their places.
What each pattern of answers means
Left heard as right and right as left means swapped cables, or headphones on backwards. A side heard as Nothing points to a silent channel and names it. Everything from one place means mono, and Both leaning to one side means that side is louder. Each sound plays twice, so answers that disagree ask for another run.
Phase heard on pink noise
Pink noise from 100 Hz to 1 kHz plays in phase, then with the right channel inverted. In phase, the two channels mixed read −20 dBFS; inverted, they cancel to digital silence, which is why a speaker wired backwards sounds thin and short of bass. Pick the fuller one, or Can’t tell, and the sound test explains your answer.
Sweeps that allow for output delay
A 30-second sweep from 20 Hz to 20 kHz and a 15-second bass sweep from 200 Hz down to 20 Hz. Stop either one where the sound fades or rattles: the reading takes off the output delay your browser reports, so it names what you heard. With 200 ms of delay, this stop reads 480 Hz instead of 502 Hz.
Bass steps for a subwoofer test
Eleven third-octave steps from ISO 266, 200 Hz down to 20 Hz, three seconds each. Count the last one you still hear, or tap a step to hold it. If a low step sounds clearly higher in pitch than the one before, the speaker is distorting and you hear its harmonics, not the note.
Treble steps for tweeters and earbuds
Seven steps from 4 kHz up to 16 kHz, three seconds each, show where a tweeter, earbuds or a laptop’s speakers fall away. Every step is sent at the same level as the other tests, so one that drops away wasn’t made quieter by the page.
Both channels on screen as they play
The output panel shows what the page sends: the frequency, each channel’s level in dBFS and both waveforms, left above and right below. While Left plays, the right meter stays empty. A sound the meters don’t show comes from after the browser: your settings, a cable or the speaker.
Sound test samples: ten test sounds made by the tool
Each sound below was rendered by this sound test’s own code and saved as a 320 kbps MP3, then decoded and measured: the levels on each card are what the file holds. Play one here, or open the same test in the studio to stop it, repeat it or change its level.
Sound test guide: speakers, headphones and your results
A full speaker test, step by step
Go through the checks in this order: each check is easier to judge once the one before has passed.
- 1Turn your device’s volume down, press Start, then raise it until the tone is clear but comfortable.
- 2Play Left, Right and Both, or Take turns. Each side should come from one speaker or one ear only.
- 3Run the blind check and read its verdict.
- 4Switch between in-phase and inverted noise, sitting midway between two speakers.
- 5Play the sweep from 20 Hz to 20 kHz and note where the sound comes in, buzzes or fades.
- 6Finish with the bass steps, and the treble steps for tweeters or earbuds.
The 1 kHz reference plays left, right, then both at one level, so the two speakers should sound equally loud: the quickest way to compare a pair.
Reading your sound test results
Swapped sides: in the left right audio test, Left came from the right. On speakers, swap the two cables or the speakers themselves; on headphones, check that L sits on your left ear.
One side quieter: open the balance slider in your computer’s sound settings, or the phone’s accessibility settings, then check that speaker’s own volume and its cable.
Everything from the middle: mono audio is on in the accessibility settings, or the device has a single speaker.
Inverted noise fuller than in-phase noise: one speaker’s red and black wires are the wrong way round. Swap them on that speaker only.
A rattle at one point of a sweep: stop there and read the frequency, then hold it in the tone generator and touch nearby things until the rattle stops.
Headphone test, phones, laptops and wireless
A headphone test is the simplest case: each ear has its own channel, so left and right are plain to hear. Phase matters most for two speakers in a room, where one wired backwards cancels the bass between them.
Turn a phone with two speakers sideways to hear left and right; a phone with one speaker plays both channels from it, and the blind check rightly calls that mono. Laptop speakers sit close together, so their sides sound near each other.
Wireless headphones add delay. The sweep reading takes off whatever delay the browser reports: in our runs Chrome reported about 50 ms and Firefox between 30 and 40 ms, though a Bluetooth device may report its own delay inaccurately. Uncorrected, 200 ms would put the full sweep’s reading about 5% high and the bass sweep’s about 3% low.
A speaker test for subwoofers and bass
The bass sweep and the bass steps both run from 200 Hz down to 20 Hz. Small speakers fade out well before the bottom, while a subwoofer should keep going. The steps are easier to judge: each holds for three seconds, so you can count the last one you hear.
A step that booms far louder than its neighbours is usually the room: move the subwoofer or your seat and it changes. A step higher in pitch than the one before means the driver is distorting; turn down and play it again.
No sound in the sound test?
If the meters move but you hear nothing, the page is sending sound and something after it is off. Check, in order:
- 1The output device in your computer’s sound settings: a monitor or headphones you put away may still be selected.
- 2The volume and mute, on the device and on the speakers.
- 3Whether this browser tab is muted.
- 4On a phone, the media volume, which is separate from the ringer.
What a browser audio test can’t measure
The levels on the page are in dBFS, counted down from digital full scale, not decibels of sound in the room. How loud −20 dBFS sounds depends on your volume, amplifier and speakers, which a browser can’t know.
It doesn’t test hearing either: where a tone disappears depends on the speakers, the volume and the room as much as on your ears. This audio test is for your equipment; for your hearing, see a hearing professional.
When a sound test helps
A few minutes with these checks settles most “is it the speakers or me?” questions.

New speakers on the desk
Run a speaker test before the cables disappear behind the desk: take turns and play the phase noise, and a swapped side or a reversed wire is a two-minute fix.

Headphones that sound lopsided
When one ear seems louder late at night, a headphone test with the blind check and the 1 kHz reference shows whether it is the headphones or the balance setting.

Movie night
Before the film starts, a short sound test checks left and right on the speakers by the screen, and the bass sweep lets you hear the rumble arrive clean.

Before a video call
A quick headphone test makes sure voices reach both ears; the mic test checks the way back.

A practice room
Check that the room’s monitors are in phase and equally loud on the reference tone, then sweep for rattles in stands and walls.

The low end
Walk the bass steps down to 20 Hz to find where a subwoofer stops, and where the room makes a single note boom.
Sound test FAQ
Start the sound test
Press Start and the sound test plays left, right and both at −20 dBFS straight away; then run the blind check, the phase noise, the sweeps and the steps.



