Free, in your browser, no app

Water Eject: Play a 165 Hz Tone to Push Water Out of Your Phone Speaker

This water eject plays a low 165 Hz tone through your phone speaker, free and right in your browser, with no app to install. The tone sets the speaker moving, and that movement may push drops out of the grille. Press Play the 165 Hz tone and it runs for 30 seconds with the frequency, the level and the time left on screen. Nothing is recorded or uploaded.

165 Hz for 30 seconds

A pure sine at −0.18 dBFS peak, with a 40 ms fade at each end.

165 Hz

Sine · peak −0.18 dBFS · 30 s

full scale0.98

Measured on the file: 0 samples clipped, 165.000 Hz

0:00 / 0:30
Open this sound in the studio
no app, no sign-up
Free
a pure sine, the default
165 Hz
the slow sweep, if you want it
120 to 250 Hz
peak, with 0 samples clipped
−0.18 dBFS
a run, faded in and out
15, 30 or 60 s
one sentence to compare
Before and after

How does a water eject sound push water out of a speaker?

Turn the media volume up, hold the phone with the speaker facing down and press Play the 165 Hz tone. For 30 seconds the water eject plays a low sine just under full scale; the speaker vibrates with it, and drops sitting in the grille may be shaken out. Wipe the grille, run it two or three times, then play the same short sentence you heard before to compare. On a phone, a low tone sounds quiet and buzzy: that is normal.

Use the water eject in three steps

The steps are the same on a phone, a tablet or a laptop, in any up-to-date browser.

  1. Volume up, speaker down

    Turn the media volume all the way up, hold the phone with its speaker facing down, and keep it away from your ear.

  2. Play the tone

    Press Play the 165 Hz tone. The water eject starts at once and counts down 30 seconds on screen.

  3. Hear it again

    Wipe the grille, run it two or three times, then play the same sentence as before and listen for a muffled sound.

A water eject sound you can see and check

You hear one clean low tone and you can read exactly what it is: its frequency, how loud it plays and how long it has left.

Raindrops on a window at dusk with city lights blurred behind

What plays, shown as it plays

While the water eject runs, the screen shows the frequency in hertz, the level in dBFS and the seconds left, with a progress bar and the live waveform. It starts the moment you press Play, with nothing to answer first.

A steady 165 Hz tone or a slow sweep

The default is a pure 165 Hz sine, the frequency a popular phone shortcut uses. Speakers differ, so the slow sweep glides from 120 to 250 Hz and back every 10 seconds, evenly in pitch, for a speaker that moves more at another frequency.

Loud, with 0 samples clipped

The water eject sound peaks at −0.18 dBFS, just under full scale, and fades in and out over 40 ms, so it starts and stops smoothly. On the sample files below we counted 0 clipped samples in both programs, and the steady tone measured 165.000 Hz.

Kept in the low band a phone speaker plays

The steady tone stays at 165 Hz, and every frequency the sweep passes through lies between 120 and 250 Hz. That is the low band where a small speaker still moves, well above infrasound and far below a high whistle.

One sentence, before and after

Before you start, play a short spoken sentence and note how it sounds; after the water eject, play it again. In English it is a tongue twister full of s and sh sounds, the first sounds a muffled speaker dulls, so a change stands out.

Then hear the whole range

Pick 15, 30 or 60 seconds for a run. When it ends, one tap opens the sound test on a sweep from 20 Hz to 20 kHz, so you can listen from the lowest note to the highest and catch any buzz or rattle.

Water eject sound samples, made by the tool

The tone and the sweep were rendered by the water eject’s own code as 320 kbps MP3 and measured on the decoded files; the sentence is read by one of the site’s voices. Play them here, or open each in the studio.

How to eject water from phone speakers with a tone

Water in the speaker grille makes sound come out muffled, quiet or crackly. A low tone moves the speaker back and forth, and that movement may push drops out through the holes. That is what the water eject does, from a browser tab.

  1. 1Turn the media volume all the way up. On many phones the ringer has a volume of its own; this needs the one for music and video.
  2. 2Hold the phone with the speaker facing down, so the drops have somewhere to go, and keep it away from your ear.
  3. 3Press Play the 165 Hz tone and let it run for 30 seconds.
  4. 4Wipe the grille dry, then run it again, two or three times in all.
  5. 5Play the before and after sentence once more and compare.

A phone speaker playing a low tone sounds quiet and a little buzzy. That is normal: small speakers give out little of the low end, so the 165 Hz tone seems faint even at full volume.

Where the 165 Hz number comes from

The 165 Hz water eject tone comes from a popular phone shortcut that many people run for this; no official source gives a frequency. That is why the studio also has the slow sweep, which passes through every frequency between 120 and 250 Hz.

Apple does something similar on its watch. Its support page on Water Lock for Apple Watch says: “A series of tones plays to clear any water that remains in the speaker.” It doesn’t name the frequencies.

Does a water eject sound work?

Here is what we can say for certain: the page plays a clean low tone at a known frequency and level, and your speaker moves with it. Whether that clears the water in your phone depends on where the water sits and how much there is.

We have not tested the water eject on wet phones, and we know of no controlled study of these tones, so this page promises nothing about the result. Drops in or just behind the grille are the ones a tone may move; water deeper inside, or in the charging port, needs time to dry. If a phone went right under water, turn it off and let it dry before you play any sound through it.

Water in the charging port: Apple’s advice

A speaker tone does nothing for a wet charging port. For iPhone, Apple’s advice is about that port: tap the phone gently against your hand with the port facing down, and wait at least 30 minutes before you charge it. Drying out completely can take up to 24 hours.

Apple also says not to dry it with heat or compressed air, not to push a cotton swab or anything else into the port, and not to put the phone in a bag of rice.

Phones, tablets, laptops and the earpiece

The water eject runs in any up-to-date browser on a phone, tablet or laptop. It plays through whichever speaker the device itself chooses for media; a web page can’t pick one speaker over another.

On many phones with stereo speakers, the earpiece at the top doubles as the second speaker for music and video, so it plays the tone too. Where the earpiece carries only calls, no web page can play sound through it.

Speaker cleaner and “fix my speakers”: what this page gives

Many people arrive here after searching for a speaker cleaner, or after typing “fix my speakers” when a phone sounded wrong after getting wet. What the water eject gives you is a low tone that sets the speaker moving, which may shake drops out of the grille. It is made for water, not dust or lint.

If the sound is still muffled after a few runs, give the phone time to dry, then check its speaker with the sound test: left, right and a sweep across the range. For a tone at any other frequency, the tone generator plays anything from 1 Hz to 22 kHz.

When people reach for a water eject

Everyday splashes and damp moments, when the speaker suddenly sounds dull.

A wet cobbled street after rain with an umbrella leaning in a doorway

Caught in the rain

A walk home through a downpour left the speaker sounding flat. Dry the phone off, then run the 165 Hz tone.

A rolled white towel on the edge of a pool in morning light

After a swim

Wet hands and a damp towel by the pool put drops on the grille. A few runs of the tone may shake them loose.

Water drops in a steel kitchen sink with a drop falling from the tap

A kitchen splash

A splash from the tap while rinsing dishes. Wipe the phone, then let the water eject play for 30 seconds.

A striped towel and sandals on the sand at sunset

A day at the beach

Spray and wet fingers at the shore. Play the tone with the speaker facing down, then wipe the grille.

A misted bathroom mirror beaded with drops, steam over the tiles

A steamy bathroom

Steam from a hot shower settles on everything. If music sounds dull afterwards, try the slow sweep.

A watering can dripping onto a sunlit lawn

Watering the garden

A splash from the watering can while you water the plants. Run the water eject, then play the same sentence to hear the difference.

Water eject FAQ

Play the water eject tone

Press Play and the water eject plays 165 Hz for 30 seconds, free in your browser. Then hear the sentence again and run a sweep on the sound test.

Play the 165 Hz tone